PRECISION TOOL MAKERS STEEL VICE (Pin Type)
Size in mm | 50 | 75 | 100 | 150 |
---|---|---|---|---|
Size in Inch | 2 | 3 | 4 | 6 |
Jaw width | 50 | 75 | 100 | 150 |
Jaw opening | 90 | 110 | 125 | 150 |
Jaw depth | 25 | 35 | 45 | 50 |
Weight in kgs | 2.0 | 3.5 | 6.0 | 12.0 |
Remarks |
* The rapid positioning notches allow the vice to be locked in any position by means on an alien key provided with the vice.
* Vee grooves in the sliding jaw, both horizontal and vertical, facilitate holding of round jobs, Jaw pressure and downward for repeatable positioning and maximum holding power.
* All vices surfaces are precision ground.
PRECISION TOOL MAKERS SINE VICE (Screw Type)
Size in mm | 75 |
---|---|
Size in Inch | 3 |
Jaw width | 75 |
Jaw opening | 85 |
Jaw depth | 40 |
Overall Height | 100 |
Overall Length | 205 |
Remarks |
* Manufacturing from special alloy steel, these solid sine vices are fully hardened (55 to 60 HRC) and tempered, mounted on to a precision hinges bottom plate.
* All Surface of the vice are precissional ground for maximum accuracy
* These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles.
* Very small angles to be set with easy using standard gauge blocks.
PRECISION TOOL MAKERS SINE VICE (Pin Type)
Size in mm | 75 |
---|---|
Size in Inch | 3 |
Jaw Width | 75 |
Jaw Opening | 105 |
Jaw Depth | 40 |
Overall Height | 102 |
Overall Length | 195 |
Remarks |
* Manufacturing from speciall alloy steel, these solid sine vices are fully hardened (55 to 60 HRC) and tempered, mounted on to a precision hinges bottom plate.
* All surface of the vice are precessional ground for maximum accuracy.
* These are very useful for manufacturing processes that require the highest standards of clamping accuracy at desired angles
* Very small angles to be set with using standard gauge blocks.